Controller Axis Cnc

Upgrade 5 Axis CNC Breakout Board + LCD Display + Handle Controller Gcode Store

Upgrade 5 Axis CNC Breakout Board + LCD Display + Handle Controller Gcode Store
Upgrade 5 Axis CNC Breakout Board + LCD Display + Handle Controller Gcode Store
Upgrade 5 Axis CNC Breakout Board + LCD Display + Handle Controller Gcode Store

Upgrade 5 Axis CNC Breakout Board + LCD Display + Handle Controller Gcode Store    Upgrade 5 Axis CNC Breakout Board + LCD Display + Handle Controller Gcode Store
5 AXIS STANDARD BREAKOUT BOARD. The breakout board in this kit is professional version, which has been upgraded to an intelligent and industrial-level interface board set including control pad and display panel.

Compared to standard version, professional version mainly has two more functions. One is the "computer G-code recording function", and the other is the "manual programing function".

Please note: This board uses parallel port to communicate with computer, the USB is used for providing power for the board. With the embedded intelligent memory chip, this breakout board can easily record MAXIMUM 4 axis' (X, Y, Z, A axis) G-code running on the CNC software e. Of the computer, after which you can control the microstep drivers and stepper motors via using the recorded G-code without computer. The upgraded built-in manual control tools (display panel and control panel) not only can be used for manual motor control, but also for manual G-code programming. Manually programmed G-code will be recorded onto the embedded intelligent memory chip, after which you also can easily control the microstep drivers and stepper motors with recorded G-code.

This function is widely applied in RBI machine, Conveyor etc. The stepper driver board controller in kit is a high performance microstepping driver adopting of 32-bit DSP, pure sine wave subdivision technology. With this technology and the self-adjustment technology (self-adjust current control parameters) for different motors, the drive motors can run with less noise, lower heating, smoother movement and have better performances at higher speed than most of the drivers in the market. Automatic G-code recording for motor control.

Manual G-code programming for motor control without computer. Equipped with the display panel and control pad for manually control the stepper motor. Automatically finish Tool-settings on X, Y, Z Axis via the control pad, without the support of the computer. Automatic circuit protections function when the wirings between the breakout board and microstep drivers are incorrect.

Display panel can real-time trail the running path of G-Code on the computer or input by the control pad, and then completely and synchronously display the changing of MAXIMUM FOUR axis' X, Y, Z A axis etc. Values on its screen, it is completely synchronous with the values' changing on the FOUR coordinates of Mach. 2 ways to get power, 5V DC power supply or USB port to get power from PC directly. Compatible with all the 2 phase, 3 phase and 4 phase microstep drivers in the market.

2-stage signal processing, smooth signal transmission, powerful anti-jamming. With Relay output control interface, available to control the spindle motor, air pump, water pump, etc. 5 Types of input control in manual control interface, to set Limit, Estop, Midpoint-Setting, Tool-Setting, etc. Compatible with the Mach2, Mach3(Default Software), LinuxCNC(EMC2), KCAM4 CNC Software, etc. The 5th axis (B axis) on the breakout board can be used as a PWM signal output interface for controlling frequency inverter via software e.

To adjust speed of main spindle. The products in the ads are for reference. Electrical Properties of 5 Axis Breakout Board(ambient temperature Tj = 25°C). 5V DC via power adapter or directly get power from PC via USB port. Pulse Direction Enable Signal Control.

2 Phase, 3 Phase, 4 Phase Microstep Driver EMA2-050D42/EMA2-070D56/EMA2-080D72/EMA2-220A80 etc. Or ordering for use of your employer and find out the Accounting Department always require a VAT invoice for reimbursement?

Invoice will be provided in electronic format. UK Individual Customer (non-VAT registered). Invoice is also available upon request. However, 95% parcels will be delivered within the reference time. Other Western Europe Countries: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Liechtenstein, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland. Other Countries & Districts (May depart from other stock location). Other Countries (May depart from other stock location).

Australia (VIC, SA, QLD, NT). Deutsche Post, DHL oder Hermens. Wenn Sie die besondere Anforderung haben, kontaktieren Sie und bestätigen Sie bitte mit uns vor Bestellung.

Anforderung, die Ware dringend bekommen. Anforderung, dass die Ware aus einem bestimmten Ort geliefert werden. Anforderung, dass die Ware innerhalb einer bestimmten Zeit geliefert werden.

Für weitere Fragen/Anforderung über die Lieferung. Andere Länder (Vielleicht Schiff aus anderen Lagerort). Die Benachrichtigung wird gesendet, nachdem Ihre Bestellung versandt wird.

Alle Pakete werden per Luftpost versendet. Es ist nicht garantiert, dass alle Pakete innerhalb der oben genannten Lieferzeit ankommen. Allerdings werden 95% Pakete innerhalb der Referenzzeit geliefert.

Es ist unmöglich, die Sendung der Luftpost im Internet zu verfolgen. Wir helfen Ihnen, wenn Sie das Problem mit der Sendungsverfolgung haben. We accept free replacement if you receive a not-as-described(defective, incorrect, parts missing) product. This item is in the category "Business, Office & Industrial\Industrial Automation & Motion Controls\Drives & Starters\Drives & Motor Controls\Stepper Controls & Drives". The seller is "sthnice" and is located in this country: GB. This item can be shipped to all countries in Europe, Antigua and Barbuda, Australia, United States, Bahrain, Canada, Brazil, Japan, New Zealand, China, Israel, Hong Kong, Malaysia, Mexico, Singapore, Korea, South, Thailand, Bangladesh, Belize, Bermuda, Barbados, Brunei Darussalam, Cayman Islands, Dominica, Ecuador, Egypt, Guadeloupe, Grenada, French Guiana, Jordan, Cambodia, Saint Kitts-Nevis, Saint Lucia, Sri Lanka, Macau, Maldives, Montserrat, Martinique, Oman, Pakistan, Peru, Reunion, Turks and Caicos Islands, Aruba, Saudi Arabia, South Africa, United Arab Emirates, Chile, Bahamas, Colombia, Costa Rica, Dominican Republic, Kuwait, Panama, Philippines, Qatar, Trinidad and Tobago, Uruguay, Vietnam.
  • Number Of Axes: 5
  • Drive Type: Pulse Direction Enable Signal Control
  • Suitable Microstep Driver: 2 Phase, 3 Phase, 4 Phase Microstep Driver
  • Version Type: Professional Version
  • Input Voltage: 5V DC via power adapter or power from PC via USB
  • Brand: Unbranded
  • Unique Function 1: Automatic G-code recording function
  • Unique Function 2: Manual G-code programing function

Upgrade 5 Axis CNC Breakout Board + LCD Display + Handle Controller Gcode Store    Upgrade 5 Axis CNC Breakout Board + LCD Display + Handle Controller Gcode Store