1 x 4GB USB Flash drive. 1 x USB Extension Cable+Accessories.HSS86 2-Phase Hybrid Stepper Servo Driver. HSS86 is 2 phase nema 34 series hybrid stepper servo driver. It adopts new generation 32 bit DSP and vector control technology, which can avoid the stepper motor losing steps and ensure the accuracy of the motor. The torque reducing is much lower than open loop stepper motor when it is at higher speed.
The high speed performance and torque are enhanced in a great extent. Meanwhile the current control is based on the load, that can reduce the motor temperature rising effectively, then can extend the using life of the motor. The build-in place in position and alarm output signal can help the upper monitor to monitor and control. The function of position ultra difference alarm can ensure the machine work safely. The closed loop system is an ideal improvement and a good replacement of open loop system, Besides that, it also have some function of AC servo motors, but price is just half of AC servo.
2.2.1 Stepper motor closed loop system, never lose step. 2.2.2 Improve motor output torque and working speed. 2.2.3 Automatic current adjustment based on load, lower temperature rising. 2.2.4 Suitable for all mechanical load conditions (include low rigidity belt pulley and wheel), no need to adjust gain parameter. 2.2.5 Motor work smoothly and low vibration, high dynamic performance at acceleration and deceleration.2.2.6 No vibration from high speed to zero speed. 2.2.7 Drive nema 34 series closed loop stepper motor. 2.2.8 Pulses response frequency can reach 200KHZ. 2.2.9 16 kinds microsteps choice, highest 51200microsteps/rev. 2.2.10 Voltage range: AC2470V or DC30V100V.
2.2.11 Over-current, over-voltage and position ultra difference protection function. Peak 8.0A (current change according to load). Closed loop stepper system can be applied to all kinds small automatic equipment and instrument. Such as engraving machine, special industrial sewing machine, stripping machine, marking machine, cutting machine, laser phototypesetting, graph plotter, cnc machine, automatic assembly equipment and so on.4 Axis Offline Controller with MPG. Digital Dream is a numerical control company specializing in the research, development and production of various CNC (Computer Numerical Control) systems since 2008. Aims to combine high quality and high reliability with affordability. The DDCS is a 34 axis motion controller for stepper and servo systems. DDCS V3.1 is updated from DDCS V2.1 on software and hardware. We are very proud of this product, it combines. Great power with a tiny footprint and is easy to use. After a very short time you will be familiar with the functions and this manual will help you. The highest output pulse per axis is 500KHz. This provides high control precision for stepper motors and servo motors.
The DDCS numerical control system adopts the ARM+FPGA design framework. ARM controls the human-computer interface and code analysis and the FPGA provides the underlying algorithms and creates the control pulse. This guarantees reliable control and easy operation.
The internal operating system is Linux based. The panel layout structure of the DDCS V3.1 is very rational to save space.
All operations are controlled by only 17 keys and a comprehensive G code set is supported. The DDCS can be used for many styles and types of CNC machines.
Lathes, Routers, Pick and Place and Mills are just a few examples. The DDCS operates as a Stand Alone system without the need of a computer. This guarantees high precision, accuracy and reliability. The interface, even very comprehensive, can be learned in a very short time.
Digital Dream Standalone Motion Controller DDCS V3.1 Page -4 DDCS V3.1 Users Manual 1.2 DDCS V3.1 Brief technical feature. DDCSV3.1 is the 4 axis motion controller which has been researched and developed by Faster CNC for four years. The control period of each position is only 4 milliseconds, with a high control precision. The highest uniaxial output pulse is 500KHz and the pulse width can be adjusted.It supports the common stepper motor and servo motor. Numerical control system adopts the ARM+FPGA design framework. The ARM can finish the part of human-computer interface and code analysis and the FPGA can finish the part of underlying algorithm and control pulse generate, with the reasonable design, reliable control and easy operation. The panel layout structure of. The CNC MOTION SYSTEM Controller can be finished only by 17 keys and it supports the FANUC with high universality to be compatible with G code set. This manual introduces the operation method of the. The machine tool and the operation procedure of the machine tool. By lots of graphical representation and examples, the uses can quickly learn to use the.
DDCS V3.1 Brief technical feature. 1 16 photoelectric isolated digital inputs, 3 photoelectric isolated digital outputs. 2 3.1 Version enhenced Algorithm, support soft interpolation, fixed arc interpolation bug of the old version. 3 Analog spindle control 0-10V spindle control (can be modified as PWM output). 4 3-4 axis motor Control.
Differential Pulse and direction output signal, Max. 5 ARM9 main control chip, FPGA core algorithm chip.
6 5 inches TFT screen, resolution ratio: 480x272,17 operation keys. 7 The Power Supply for the controller is 24VDC, minimum Current is 0.5A. 9 USB flash disk support for G code file input, no size limited of the G-code file. 11 Jog function for each axis (continuous, step, defined distance);Customer can define the distance.
12 Support the operation of quickly specify the running position. 13 Support for Power Cut recovery.14 The controller only support NPN type limited switch. 1.3 Outward Appearance, Structure and Size. The DDCS V3.1 is a small box that can fit in a window of a small control box or control cabinet. Four locking hooks fix this controller from the frame. The front panel is 191mm128mm5mm The main body is 191mm128mm37mm. To mount the unit in an equipment c abinet, cut the hole182.5mm59mm. The front of the product is 17 user keys and 1 4.3and 480272 LSD (Liquid Crystal Display), and the reverse side is input signal, spindle control, stepper/ servo control, MPG and other four sets of interfaces as well as USB interface and power interface. Please look at the reference picture 1-3 and picture 1-4 in detail.
This USB Interface is the standard USB socket of A-type, attached a 50cm USB extension cord with installation lugs. 1.4 Explanation of Abbreviations. When operating the DDCS, the users will come across some English abbreviations.
Here a list with explanations. F: Feed rate, unit is mm/min.
S: Spindle Speed, unit rev/min. X: The coordinate code of the X axis. Y: The coordinate code of the Y axis. Z: The coordinate code of the Z axis.
A: The coordinate code of the A axis. BUSY: The system is busy. You still can adjust FRO and SRO.READY: READY mode, any operation can be done. RESET: Reset mode, controller is in OFF mode, no operation can be performed. CONT: Continuous mode, each axis can be manually jogged with the arrow keys. Step :Manual Step Modeeach axis can be jogged in defined steps. Operate the machine with the MPG (Manual Pulse Gener ator).
Auto is showing when file is processing. Pendant Handwheel with Emergency stop. All Wiring isolated from MPG unit and provide a easy to install wiring diagram, it suit both commercial machine as a replacement jog control unit or other computer based controller.
Which add great control flexibility to the system. X, Y, Z, 4th axis selector switch. 6ft extendable high quality shielded cable cord.
Magnetic base holder can place anywhere on the machine steel surface. Required 5V+, 150mA, power for MPG. Phase output is A , /A and B, /B.
TTL output, drive capability +-20mA. Support CNC system:Taiwan Pou Yuen M600 M500 M520i T300 series, Higerman, HANUC, GSK, opened NC, KND, Siemens, the NUM, Spain FAGOR (NEW, 8055I) and so on. Wiring:User can wire this unit to the CNC system with easy.CNC system and position control of various mechanical devices, mainly for CNC machine tools and various mechanical zero correction and signal division. 100 times per revolution slightly. Cracking point, 100 pulses per revolution output, holding the handle of the panel and all-metal high-grade design.
Metal code disc, high precision, good texture. Easy installation, shaped thin, ultra-light.
Voltage, single-ended, differential in three output options provide 100PPR pulse output options. Driver output type, anti-interference ability, long-distance transmission. Oil, water, dust-proof design (grade IP65) spiral stretch 20 million guaranteed.
Novelty, easy to move, interference, load capacity. Full plastic shell, insulation, high strength, anti-oil seal design.
With × 1, × 10, × 100 third gear ratio, enabling 4-12 axis magnification switch. With the control switch, emergency stop switch optional, easy to operate. For CNC machine tools, printing machinery, numerical control equipment.
OFF, X, Y, Z, 4. Please give us the opportunityto resolve any problem when you have, we concern your problem and we will try our best to resolve it.
Item must be in it's original condition and no physical damage. When you have the parcel, and not satisfied the goods or it is other problem like as broken, pls tell us the detail reason and provide the photos. M Servo Motor Driver 4 Axis Offline CNC Controller PLC DDCSV3.1 + MPG" is in sale since Thursday, August 5, 2021. This item is in the category "Equipamiento y maquinaria\Automatiza., motores y ejes\Motores eléctricos\Motores servo".The seller is "kuku218" and is located in Zuerich . This item can be shipped to European Union member countries, United Kingdom.