EU? 5 Axis Standalone Motion CNC Controller PLC DDCS Expert + MPG Handwheel

  

5 Axis Standalone Motion CNC Controller PLC DDCS Expert + MPG Handwheel. 1.1 Product Brief Introduction. Digital Dream is a numerical control company specializing in the research, development. And production of various CNC (Computer Numerical Control) systems since 2008. Aims to combine high quality and high reliability with affffordability.

The DDCS Expert is a 35 axes motion controller for open or close stepper and servo systems. With 7/10.2 full color display screen. The highest output pulse per axis is 1MHz. This controller supports multiple spindle mode, support straight. Tool Magazine, gantry type Magazine, disk type magazine. The Operation system interface even. Though very comprehensive, can be learned in very short time. The DDCS Expert numerical control system adopts the ARM+FPGA design framework. Controls the human-computer interface and code analysis and the FPGA provides the underlying.

Algorithms and creates the control pulse. This guarantees reliable control and easy operation. The internal operating system is Linux based. The DDCS Expert can be used for many styles and types of CNC machines.

Pick&Place and Mills, lathe and cutters are just a few examples. The DDCS Expert operates as a.

Stand Alone system without the need of a computer. This guarantees high precision, accuracy. 1 x 5 Axis DDCS Expert PLC offline CNC Controller 1 x handwheel with emergency stop 1 x Cable. 1.2 DDCS-Expert Brief technical feature. Axis circular interpolation; 1 Max. 5 Axis; 1M Hz output frequency for each axis; 2-4 Axis linear interpolation, any 2.

2 7 inch full color display screen; resolution ratio: 1024600, 40 operation keys. 3 24 photoelectric isolated digital inputs, 21 photoelectric isolated digital outputs. 4 Analog spindle control 0-10V spindle control, also support PWM Output. 5 Magazine type: Supports multiple spindle mode, support straight Tool Magazine, gantry. Type Magazine, disk type magazine.

6 Probe Mode: Supprt Floating Probe and Fixed Probe. Tion, length compensation; 7 Backlash compensation methods: direction gap compensation, radius gap compensa. 8 Interpolation Algorithm: S type, circular hard algorithem, circular soft algorithm. 10 Software Alarms: Program Error, operation Error, overtravel Error, Driver Error and so. 11 Network: Support fifile share and online machining the remote fifiles by Ethernet.

Output, and servo spindle output; 12 Spindle control mode support Multi-speed (3 lines 8 kinds speed), 0-10V Analog. 13 Compatible with standard G-code, support popular CAD/CAM software, such as. ArtCam, MasterCam, ProE, JDSoft SurfMill, Aspire, Fusion 360 and so on. 14 The control system can preview the processing path before machining, and it makes.

The system more steady, working smoothy and precise. 15 Support high speed machining in continuous Polyline segment, system can choose a. Most effiffifficient algorithm automatically from difffferent kinds Polyline segment algorithm. 16 Support un-limited size fifile for machining. 17 Support Pause Breakpoint resume, "Power Cut" recovery, Start from the specifific line. 19 Support 4 kinds operation rights: visitor, operator, admin, super admin. Mode" and so on; 20 Support function of "Try cutting" (handwheel guiding) and "Single-stage processing. 21 Support the fuction of Back to orignal point. 21 The Power Supply for the controller is 24VDC, minimum Current is 0.5A. 22 The Power Supply for IO Port is 24VDC, minimum current is 0.5A; By the IO power. Note: the unconnected wire must be cut off with bare copper, and then wrapped and wrapped, do not touch other lines, components and casing to avoid short circuit. The positive and negative lines of the encoder cannot be reversed to avoid affecting the operation of the handwheel. COM point is the common point of the handwheel switch, must be connected, otherwise the switch can not work normally. If there is no A-, B-signal, it will not be connected. Mitsubishi has no A-, B-signal, PLC has no A-, B-signal is not connected. X, Y, Z, 4th axis selector switch. 6ft extendable high quality shielded cable cord. Magnetic base holder can place anywhere on the machine steel surface. Required 5V+, 150mA, power for MPG.

Phase output is A, /A and B, /B. TTL output, drive capability +-20mA.

Support CNC system:Taiwan Pou Yuen M600 M500 M520i T300 series, Higerman, HANUC, GSK, opened NC, KND, Siemens, the NUM, Spain FAGOR (NEW, 8055I) and so on. Wiring:User can wire this unit to the CNC system with easy. All Wiring isolated from MPG unit and provide a easy to install wiring diagram, it suit both commercial machine as a replacement jog control unit or other computer based controller. Which add great control flexibility to the system. Double check your address when you order after. We are not responsible for wrong or undeliverable address. If the order is during the weekends, it will be take extra 2 days longer. We care about our valued customers, and will always try to help you, hope to establish long business with you. Pls give us the opportunity to resolve any problem, we understand the concerns and frustrations you might have, and will try our best to resolve the issues. When you have the parcel, and not satisfied the goods or it is other problem like as broken, pls tell us the detail reason and provide the photos.

We will help you to solve all problems. This item is in the category "Business, Office & Industrial\Industrial Automation & Motion Controls\Other Automation Equipment". The seller is "rattmmotor" and is located in this country: DE.

This item can be shipped to United Kingdom, European Union.

• Brand: RATTM MOTOR
• keys: 40 operation keys
• Model: DDCS Expert
• Country/Region of Manufacture: China
• Application: CNC Router Milling Engraver/Servo/Stepper
• Axis: 5 Axis