4 Axis Ethernet Mach3 Motion Control Card NVEM. NVEM V2 is the 3-6 axis motion controller we spend 4 years to design. NVEM V2 support Mach3 software and standard MPG, through Ethernet to communicate with computer, just use the Twine to connect directly or transfer with router. NVEM V2 motion controller adopts the ARM design framework.
The ARM design includes communication, codeanalytic, underlying algorithm and pulse gerneration. Rational design, reliablecontrol, convenient operation. This manual introduces operation, connection and usage schedule of our professional motion controller for engraving machine.Through a lot of the drawing the users can learn quickly how to use this motion controller. 1 Can control up to 3/4/5/6 stepper motor at the same time. 2 Support Motor: Servo motor, Stepper motor. 3 With 12 channel programmable input port.
4 With 10 channel programmable output port. 5 1 channel standard MPG interface. 7 Ethernet interface, support MACH3 software. 10 Up to 200KHz stepper motor control pulse output. 2 12 ports photoelectric isolated input interface for ordinary digital data.
3 10 ports photoelectric isolated output interface for ordinary digital data. 4 1 port 0-10V spindle speed analog output interface(can change to PWM output).
5 Can support 3-6 axis stepper systems, 200KHz pulse output for every axis. 6 ARM motion control chip. 7 Main device is 12V-32VDC power supply input, current should higher than 0.5A. 8 Compatible with MPG input, support the digital display MPG from our company.Product connection define and method. Product wiring section and interface summary. As the figure showed, the connection of the controller includes power supply interface, Ethernet connection interface, MPGinterface, Stepper/Servo control output interface, spindle control output interface, Estop and limited switch and tool setting input interface and so on. Now we descript them in details as below. 2.1 Stepper motor control interface. 1 terminal block is 6 axis stepper driver control output interface, from left to right, there are X, Y, Z, A,, B, C 6 axis output, it's common anode, the cable connection for each axis is COM+/CP-/DIR-, COM is common+, CP is Pulse-, DIR is direction. Connection showed as Figure 2-3. Com+ connect with the SP+ and DIR+. 2.2 Spindle control output. We define the interface from left are: GND1(Output GND), VSO(0-10V adjustable speed output), INDEX(spindle speed feedback input), OUT1(common output port 1), OUT2(common output port 2). Take Nowforeuer inverter as the example. Spindle control output and the inverter connection showed as Figure 2-4. If ACM and DCM are closed, only need to connect one port. If need the Mach 3 to show the real in time spindle speed, just fix one hall device, every revolution send one pulse between INDEX and GND1, pulse voltage is 5V-10V. Please check out your address carefully when processing order. We are not responsible for wrong or undeliverable address. 1530 workings days to most other countries. When you have the parcel, and not satisfied the goods or it is other problem like as broken, pls tell us the detail reason and provide the photos, we will help you to solve any problems. We work hard to make sure EVERY CUSTOMER 100% satisfaction. This item is in the category "Business, Office & Industrial\Industrial Automation & Motion Controls\Other Automation Equipment".
The seller is "powace1515" and is located in this country: DE. This item can be shipped to United Kingdom, European Union.