DDSM6V5.0, they are 3? These 4 cards use the same Hardware platformDDSMXV5.0. They are limited to 3,4,5,6 axes for different voice of customer. They use the same manual.Simultaneously control 6 stepper motors. With 24 programmable input interface, can be configured to be "limit", "E-stop" and other functions. With 14 programmable output interface, can work with water-cooling or mist-cooling spindle and other devices.
PWM/VSO(0-10V) spindle control mode. USB interface, support MACH3 software. Stepper motor pulse control output, suitable for most machine system. 1USB communication interface, and power supply for the board. 210 IO input, opto-isolated, It Can be configured to limit the emergency stop and other functions, all of them are 2edg port.
314 IO input with no opto-isolated but with iso-IC. This port is set to IDC 2.54mm port. 414 IO output with no opto-isolated but with iso-IC. 52IO output with opto-isolated for spindle. 6up to 6 axes stepper-motor control port.
Each port has up to 200KHz plus output. 7COTEX-M3 of NXP-LPC is main control chip.New design Aluminum shell make the system more stable. This system is equipped with RS2332 manual control box. You can use manual control box with this port. Spindle control port has PWM Mod(0%-100% dutycycle with 12Vpp)and voltage Mod(0-10V). Spindle speed feed back port-INDEX. There is a power autostability system.
When USB port overvoltage or undervoltage or within other EMI, this system can make power of system stable. There are High speed interface chips, which make stepper driver signal more stable. There is a USB protection chip, which can protect system within high voltage EMI.Stepper motor control signal output voltage: 5V; Spindle signal: 10V. 1 X 200KHz 6 Axis USB Mach3 Card. This item is in the category "Business, Office & Industrial\Industrial Automation & Motion Controls\Other Automation Equipment". The seller is "prettyworthshop" and is located in this country: CN. This item can be shipped worldwide.