- Controller Axis Cnc
- Brand
- Encoder
- Frame Size
- Hold Torque
- Holding Torque
- 12n.m (3)
- 12nm (3)
- 1600 Oz-in / 1200ncm (3)
- 270 Oz-in (3)
- 270 Oz-in / 180n.cm (6)
- 270oz-in (3)
- 270oz-in / 180ncm (6)
- 3nm (5)
- 4.5n.m (2)
- 4.5nm (4)
- 425 Oz-in (10)
- 425 Oz-in / 280ncm (2)
- 425oz-in (5)
- 425oz-in / 280ncm (5)
- 425oz-in 2.8n.m (2)
- 435 Oz.in (2)
- 8.5nm+12nm (3)
- 878 Oz-in / 560ncm (6)
- 8n.m (9)
- ... (1801)
- Marke
4Axis CNC6090 2.2KW USB VFD Router Engraver Engraving Machine Metal Carving Mill
4Axis CNC6090 2.2KW USB VFD Router Engraver Engraving Machine Metal Carving Mill. USB Router Engraver Engraving Machine Metal Carving Mill VFD. 1X main unit (working base).
1X Sinal cable for A axis. 6X 410mm black Inner six angle screw with nut. 8X 520mm black Inner six angle screw.
4X 58mm Flat Philip's head screw with nut and gasket. 8X 624mm BALCK FLAT Inner six angle screw. 2X six angle Wrench(3mm). 2X six angle Wrench(4mm). 1x Tools Setting Auto-Check Instrument for CNC.CNC Router engraving machine parameters. Working platform size:1045x720mm(LxW).
Assembling and locating the CNC machine on steady desk well. Make sure that your computer has a USB port output. Place the control box in a ventilated dry place where there is no dust, no moisture.
Connecting the control box with the CNC machine and you computer and make sure the plug will not come off. Correctly connect the machine with the controller. Don't suspended the cable which connect the Spindle motor with axis(X, Y, Z, A). Damage the driver of the controller.
Correctly install the Spindle motor and the heat pump. The heat pump should be covered completely in the water, then turned on the electric current to check whether the water-cooling system working well. Installing a CNC control software and Drive such as the MACH 3 or EMC2 on your computer. Following our manual or guideline to set the software. Before turn on the machine, please check all the cable and water- cooling system to make sure they are working fine.
You can enjoy making you dream with using our CNC machine now. Notice: the Communication interface of the control box is USB Port, this machine can only work with Win XP 32Bit / Win 7 32Bit / Win XP 64 Bit / Win 7 64 Bit PC system. Frame Material: The whole machine used 6061 aluminum profiles. Feeding height: =140mm(From base of Z axis to platform). X, Y, Z Working Area: 600x900x150mm.
X axis:SFU1605 Ball Screws. Y axis:SFU1605 Ball Screws. Z axis:SFU1204 Ball Screws. X axis:ø20 High intensity round rail. Y axis: SBRø20 high-strength aluminum base rails.
Z axis: ø12 high-strength round rail. Stepping motor: two-phase 3A (with hand wheels).Driving Power for Stepping motor: AC 220V, Output DC 24V, 10A. Working Speed: 50-1500mm/min (different material with different speed settings). Spindle motor: 2200W high-speed variable frequency spindle motor, ER20 chuck, matching 6mm bur. 1, Water cooled spindle motor can work longer time than air cooled motor. 2, Water cooled spindle motor has higher stability and better concentricity than air cooled motor.
Variable-frequency Drive(VFD): AC220V, 2200W, 0-400Hz(built-in Control box). The spindle motor must connect with the VFD. It cannot directly connect with the supply voltage (AC 220V). Please don't change the data setting of the VFD if you are not professional technicians, or it might damage the spindle motor. Drive of Stepping motor 0-3.5A adjustable four-axis drive TB6560AHQchip, 24V power supply, 2, 4, 8, 16Subdivision settings, Factory.
Cooling method: Water cooling, Matching heat dissipation water pump. Spindle precision: Radial runout=0.03mm. Carving command: G code/TAB file/nc/TAB /NCC/file. Communication interface: through USB PORT connect with computer.Software environment: Windows XP / win7 with 32 bite (proper computer system makes the software run, otherwise it will not). Gross weight of machine: About 145kg/320lb. Update function: with limit switch. Woodworking industry: sculpture, round carving, wooden handicraft processing.
Advertising signs: logo making, cutting acrylic, plastic molding, suit for making a variety of materials advertising decorative products. Other industries: The engraver could do shadow-carved, sculpture which widely used in the gift industry; can be used in aluminum cutting industry, such as aluminum, aluminum-plastic plate, aluminum honeycomb panels, aluminum, 3D engraving process, Artificial plate, cutting LED and neon letter, making plastic light box model; also can engrave on acrylic, copper, PVC board, artificial stone, MDF board, and other metal sheet. Friendly reminder:The engraver will come with MACH 3 softwareFree Version. If you followed the installation tips offered by us, it works like full version. The software can only work on 32 bites system computer. Please close the firewall and antivirus software on the computer before DOWNLOAD AND install the software.Otherwise, the antivirus will regards the CNC software is virus and stop the installation. Please don't update the software when installed, then it will not need the license Numbers. The NEW 2.2KW water-cooled VFD is available operating for long time, which can reinforced the processing ability of the machine and can be used to engrave on aluminum alloy and hard wood. Water cooling spindle works more stable and durable.
High quality accurate ball Screws drive make the engraving more precision. Anti-blackflash, high precision, long life circle.Feedback is very important to us. It is impossible to address issues if we do not know about them! Please keep the original box or packaging within 15days since item received. Your satisfaction is our ultimate goal.
We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it's non-workdays, please kindly be patient and wait till Monday.This item is in the category "Business, Office & Industrial\CNC, Metalworking & Manufacturing\Woodworking Supplies\Other Woodworking Supplies". The seller is "atyokado" and is located in this country: GB. This item can be shipped to United Kingdom. Feeding height: ≤140mm(From base of Z axis to platform)