Germany to European Union Customers. 4 Axis Ethernet MACH3 Motion Control Card NVEM. 1 Can control up to 3/4/5/6 stepper motor at the same time. 2 Support Motor: Servo motor, Stepper motor.3 With 12 channel programmable input port. 4 With 10 channel programmable output port. 5 1 channel standard MPG interface. 7 Ethernet interface, support MACH3 software. 10 Up to 200KHz stepper motor control pulse output.
2 12 ports photoelectric isolated input interface for ordinary digital data. 3 10 ports photoelectric isolated output interface for ordinary digital data.
4 1 port 0-10V spindle speed analog output interface(can change to PWM output). 5 Can support 3-6 axis stepper systems, 200KHz pulse output for every axis. 6 ARM motion control chip. 7 Main device is 12V-32VDC power supply input, current should higher than 0.5A.
8 Compatible with MPG input, support the digital display MPG from our company. Product connection define and method. Product wiring section and interface summary. As the figure showed, the connection of the controller includes power supply interface, Ethernet connection interface, MPGinterface, Stepper/Servo control output interface, spindle control output interface, Estop and limited switch and tool setting input interface and so on. Now we descript them in details as below.
2.1 Stepper motor control interface. 1 terminal block is 6 axis stepper driver control output interface, from left to right, there are X, Y, Z, A,, B, C 6 axis output, it's common anode, the cable connection for each axis is COM+/CP-/DIR-, COM is common+, CP is Pulse-, DIR is direction. Connection showed as Figure 2-3. Com+ connect with the SP+ and DIR+. 2.2 Spindle control output.
We define the interface from left are: GND1(Output GND), VSO(0-10V adjustable speed output), INDEX(spindle speed feedback input), OUT1(common output port 1), OUT2(common output port 2). Take Nowforeuer inverter as the example. Spindle control output and the inverter connection showed as Figure 2-4.
If ACM and DCM are closed, only need to connect one port. If need the Mach 3 to show the real in time spindle speed, just fix one hall device, every revolution send one pulse between INDEX and GND1, pulse voltage is 5V-10V.
Please give us the opportunity to resolve any problem when you have, we concern your problem and we will try our best to resolve it. When you have the parcel, and not satisfied the goods or it is other problem like as broken, pls tell us the detail reason and provide the photos. Item must be in it's original condition and no physical damage.
Customer's satisfaction is very important to us. This item is in the category "Business, Office & Industrial\Industrial Automation & Motion Controls\Other Automation Equipment". The seller is "infoshine15" and is located in this country: DE.This item can be shipped to United Kingdom, European Union.