Controller Axis Cnc

4 Axis CNC Controller Motion Motor Control Offline Standalone PLC+100PPR MPG? EU

4 Axis CNC Controller Motion Motor Control Offline Standalone PLC+100PPR MPG? EU
4 Axis CNC Controller Motion Motor Control Offline Standalone PLC+100PPR MPG? EU
4 Axis CNC Controller Motion Motor Control Offline Standalone PLC+100PPR MPG? EU
4 Axis CNC Controller Motion Motor Control Offline Standalone PLC+100PPR MPG? EU
4 Axis CNC Controller Motion Motor Control Offline Standalone PLC+100PPR MPG? EU
4 Axis CNC Controller Motion Motor Control Offline Standalone PLC+100PPR MPG? EU
4 Axis CNC Controller Motion Motor Control Offline Standalone PLC+100PPR MPG? EU
4 Axis CNC Controller Motion Motor Control Offline Standalone PLC+100PPR MPG? EU
4 Axis CNC Controller Motion Motor Control Offline Standalone PLC+100PPR MPG? EU
4 Axis CNC Controller Motion Motor Control Offline Standalone PLC+100PPR MPG? EU
4 Axis CNC Controller Motion Motor Control Offline Standalone PLC+100PPR MPG? EU
4 Axis CNC Controller Motion Motor Control Offline Standalone PLC+100PPR MPG? EU

4 Axis CNC Controller Motion Motor Control Offline Standalone PLC+100PPR MPG? EU    4 Axis CNC Controller Motion Motor Control Offline Standalone PLC+100PPR MPG? EU
4 Axis CNC Controller Motion Motor Control Offline Standalone PLC+100PPR MPG Handwheel with E-Stop. For CNC Router Milling Lathe Engraving Machine. Free duty to below EU Customers. A ustria, B elgium, B ulgaria, C zechRepublic, D enmark, E stonia, F inland, F rance, G ermany, G reece, H ungary, I reland, I taly, L atvia, L iechtenstein, L ithuania, L uxembourg, M onaco, N etherlands, P oland, P ortugal, R omania, S lovakia, S lovenia, S pain, S weden. We will send this item from Germany Warehouse by DHL/DPD to EU Countries.

1 x 4 Axis CNC. 1 x 4 Axis 100 Pulse Pendant Handwheel MPG with emergency stop with 15-pin connector. 1 x 4GB USB Flash drive. DDCS V3.1 Controller Brief Introduction.

1.1 Introduction of Product. The DDCS is a 34 axis motion controller for stepper and servo systems. The highest output pulse per axis is 500KHz.

This provides high control precision for stepper motors and servo motors. The DDCS numerical control system adopts the ARM+FPGA design framework. ARM controls the human-computer interface and code analysis and the FPGA provides the underlying algorithms and creates the control pulse. This guarantees reliable control and easy operation. The internal operating system is Linux based. The panel layout structure of the DDCS V3.1 is very rational to save space. All operations are controlled by only 17 keys and a comprehensive G code set is supported. The DDCS can be used for many styles and types of CNC machines. Lathes, Routers, Pick&- Place and Mills are just a few examples.

The DDCS operates as a Stand Alone system without the need of a computer. This guarantees high precision, accuracy and reliability. The interface, even very comprehensive, can be learned in a very short time. 1.2 DDCS V3.1 Brief technical feature. 1 16 photoelectric isolated digital inputs, 3 photoelectric isolated digital outputs.

2 3.1 Version enhenced Algorithm, support soft interpolation, fixed arc interpolation bug of the old version. 3 Analog spindle control 0-10V spindle control (can be modified as PWM output). 4 3-4 axis motor Control. Differential Pulse and direction output signal, Max. 5 ARM9 main control chip, FPGA core algorithm chip. 6 5 inches TFT screen, resolution ratio: 480x272,17 operation keys. 7 The Power Supply for the controller is 24VDC, minimum Current is 0.5A. 9 USB flash disk support for G code file input, no size limited of the G-code file. 11 Jog function for each axis (continuous, step, defined distance);Customer can define the distance. 12 Support the operation of quickly specify the running position. 13 Support for "Power Cut" recovery. 14 The controller only support NPN type limited switch.

Outward Appearance, Structure and Size. The DDCS V3.1 is a small box that can fit in a window of a small control box or control cabinet. To mount the unit in an equipment c abinet, cut the hole182.5mm59mm. The front of the product is 17 user keys and 4.3 and 480272 LSD (Liquid Crystal Display), and the reverse side is input signal, spindle control, stepper/ servo control, MPG and other four sets of interfaces as well as USB interface and power interface.

Four locking hooks fix this controller from the frame. The front panel is 191mm128mm5mm. The main body is 191mm128mm37mm.

The back panel is 175mm110mm. F: Feed rate, unit is mm/min. S: Spindle Speed, unit rev/min. X: The coordinate code of the X axis. Y: The coordinate code of the Y axis.

Z: The coordinate code of the Z axis. A: The coordinate code of the A axis. BUSY: The system is busy. You still can adjust FRO and SRO. READY: READY mode, any operation can be done. RESET: Reset mode, controller is in" OFF" mode, no operation can be performed. CONT: Continuous mode, each axis can be manually jogged with the arrow keys. Step :Manual Step Mode, each axis can be jogged in defined step. Operate the machine with the MPG (Manual Pulse Gener ator).

1.3 Appearance, Structure and Size of Product. The dimension you find in picture 1-1 and picture 1-2. The front panel is 191mm128mm5mm; The main body is 191mm128mm37mm; To mount the unit in an equipment cabinet, cut the hole182.5mm59mm.

Pendant Handwheel with Emergency stop (plug & play). All Wiring isolated from MPG unit and provide a easy to install wiring diagram, it suit both commercial machine as a replacement jog control unit or other computer based controller. Which add great control flexibility to the system. X, Y, Z, 4th axis selector switch.

6ft extendable high quality shielded cable cord. Magnetic base holder can place anywhere on the machine steel surface. Required 5V+, 150mA, power for MPG.

Phase output is A, /A and B, /B. TTL output, drive capability +-20mA. Support CNC system:Taiwan Pou Yuen M600 M500 M520i T300 series, Higerman, HANUC, GSK, opened NC, KND, Siemens, the NUM, Spain FAGOR (NEW, 8055I) and so on. Wiring:User can wire this unit to the CNC system with easy. CNC system and position control of various mechanical devices, mainly for CNC machine tools and various mechanical zero correction and signal division.

100 times per revolution slightly. Cracking point, 100 pulses per revolution output, holding the handle of the panel and all-metal high-grade design. Metal code disc, high precision, good texture.

Easy installation, shaped thin, ultra-light. Voltage, single-ended, differential in three output options provide 100PPR pulse output options. Driver output type, anti-interference ability, long-distance transmission. Oil, water, dust-proof design (grade IP65) spiral stretch 20 million guaranteed. Novelty, easy to move, interference, load capacity. Full plastic shell, insulation, high strength, anti-oil seal design. With × 1, × 10, × 100 third gear ratio, enabling 4-12 axis magnification switch. With the control switch, emergency stop switch optional, easy to operate. For CNC machine tools, printing machinery, numerical control equipment.

OFF, X, Y, Z, 4. Item must be in it's original condition and no physical damage. We are happy to have your questions.

We are here to solve them by the friendly and quick ways. This item is in the category "Business, Office & Industrial\Industrial Automation & Motion Controls\Drives & Starters\Drives & Motor Controls\Other Motor Controls". The seller is "kuku218" and is located in this country: DE. This item can be shipped to United Kingdom, European Union.

  • Unit Quantity: 1.3KG
  • Voltage: 24VDC
  • Axis: 4 axis
  • Application: CNC Router Milling Lathe machine
  • Model: DDCSV3.1
  • Frequence: 500KHz
  • Pendant Handwheel: 4 axis 100 pulse MPG
  • Flash Driver: 4GB USB
  • Size: 156mm*93mm*45mm
  • EU Warehouse: Ship from Germany
  • Brand: RATTM MOTOR


4 Axis CNC Controller Motion Motor Control Offline Standalone PLC+100PPR MPG? EU    4 Axis CNC Controller Motion Motor Control Offline Standalone PLC+100PPR MPG? EU