4 Axis CNC 6090 Router USB Engraver Engraving Machine Carving Milling 2.2KW + RC. 1X main unit (Frame) 1X main unit (working base) 2X Fence baffle 1X control box 1X A axis 1X Sinal cable for A axis 1X pump 1X USB cable 2X cutter 26mm 2X cutter 36mm 10X 47mm round head 6X 410mm black Inner six angle screw with nut 8X 520mm black Inner six angle screw 4X 58mm Flat Philip's head screw with nut and gasket 8X 624mm BALCK FLAT Inner six angle screw 12X Aluminium fastener 1X 13-15# Wrench 1X 14-17# Wrench 2X six angle Wrench(3mm) 2X six angle Wrench(4mm) 1X Teflon tape 2X Fuse (5A) 1X Power cable 1X Manual 1x Tools Setting Auto-Check Instrument for CNC. CNC Router engraving machine parameters. Model: CNC6090GZ Outside dimension:1150x970x650mm(LxWxH) Working platform size:1045x720mm(LxW). Assembling and locating the CNC machine on steady desk well.
Make sure that your computer has a USB port output. Place the control box in a ventilated dry place where there is no dust, no moisture 4. Connecting the control box with the CNC machine and you computer and make sure the plug will not come off. Correctly connect the machine with the controller. Don't suspended the cable which connect the Spindle motor with axis(X, Y, Z, A).
It will damage the driver of the controller. Correctly install the Spindle motor and the heat pump.
The heat pump should be covered completely in the water, then turned on the electric current to check whether the water-cooling system working well. Installing a CNC control software and Drive such as the MACH 3 or EMC2 on your computer. Following our manual or guideline to set the software.
Before turn on the machine, please check all the cable and water- cooling system to make sure they are working fine. You can enjoy making you dream with using our CNC machine now. Notice: the Communication interface of the control box is USB Port, this machine can only work with Win XP 32Bit / Win 7 32Bit / Win XP 64 Bit / Win 7 64 Bit PC system.
Frame Material: The whole machine used 6061 aluminum profiles Max. Feeding height: =140mm(From base of Z axis to platform) X, Y, Z Working Area: 600x900x150mm. X axis:SFU1605 Ball Screws; Y axis:SFU1605 Ball Screws; Z axis:SFU1204 Ball Screws. X axis:ø20 High intensity round rail, Y axis: SBRø20 high-strength aluminum base rails; Z axis: ø12 high-strength round rail Stepping motor: two-phase 3A (with hand wheels) Driving Power for Stepping motor: AC 220V, Output DC 24V, 10A Maximum Idle speed: 1500mm/m Working Speed: 50-1500mm/min (different material with different speed settings) Spindle motor: 2200W high-speed variable frequency spindle motor, ER20 chuck, matching 6mm bur.
1, Water cooled spindle motor can work longer time than air cooled motor. 2, Water cooled spindle motor has higher stability and better concentricity than air cooled motor. Variable-frequency Drive(VFD): AC220V, 2200W, 0-400Hz(built-in Control box) tips:1. The spindle motor must connect with the VFD. It cannot directly connect with the supply voltage (AC 220V).
Please don't change the data setting of the VFD if you are not professional technicians, or it might damage the spindle motor. Drive of Stepping motor 0-3.5A adjustable four-axis drive (TB6560AHQchip, 24V power supply, 2, 4, 8, 16Subdivision settings, Factory setting: 8 subdivided) Repositioning precision: =0.05mm Speed: 0-24000r/m Cooling method: Water cooling, Matching heat dissipation water pump Spindle precision: Radial runout=0.03mm Carving command: G code/TAB file/nc/TAB /NCC/file Protection: Emergency stop button Recommend software: Mach3, EMC2 Communication interface: through USB PORT connect with computer Software environment: Windows XP / win7 with 32 bite (proper computer system makes the software run, otherwise it will not) Input Volts: AC 220V Gross weight of machine: About 145kg/320lb Update function: with limit switch. Woodworking industry: sculpture, round carving, wooden handicraft processing Advertising signs: logo making, cutting acrylic, plastic molding, suit for making a variety of materials advertising decorative products Other industries: The engraver could do shadow-carved, sculpture which widely used in the gift industry; can be used in aluminum cutting industry, such as aluminum, aluminum-plastic plate, aluminum honeycomb panels, aluminum, 3D engraving process, Artificial plate, cutting LED and neon letter, making plastic light box model; also can engrave on acrylic, copper, PVC board, artificial stone, MDF board, and other metal sheet.
Friendly reminder:The engraver will come with MACH 3 softwareFree Version If you followed the installation tips offered by us, it works like full version. The software can only work on 32 bites system computer.
Please close the firewall and antivirus software on the computer before DOWNLOAD AND install the software. (This is very important) Otherwise, the antivirus will regards the CNC software is virus and stop the installation. Please don't update the software when installed, then it will not need the license Numbers. The NEW 2.2KW water-cooled VFD is available operating for long time, which can reinforced the processing ability of the machine and can be used to engrave on aluminum alloy and hard wood.
Water cooling spindle works more stable and durable. High quality accurate ball Screws drive make the engraving more precision. Anti-blackflash, high precision, long life circle. Feedback is very important to us. It is impossible to address issues if we do not know about them!
Please keep the original box or packaging within 15days since item received. Your satisfaction is our ultimate goal. We work hard to earn your trust and future business.
A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it's non-workdays, please kindly be patient and wait till Monday.
This item is in the category "Business, Office & Industrial\CNC, Metalworking & Manufacturing\Woodworking Supplies\Other Woodworking Supplies". The seller is "yybshop07" and is located in this country: GB. This item can be shipped to United Kingdom.
Feeding height: ≤140mm(From base of Z axis to platform)