TC5530V 3 Axis CNC Motion Controller w/3.5 LCD For Router Servo Stepper Motor. TC5530V 3 Axis CNC Controller Motion Controller w/ 3.5 Color LCD For CNC Router Servo Stepper Motor Description. It is an upgrading version of TC55. It is equipped with a 3.5-inch color screen, RS485 communication, Chinese/English Switch, and USB connection. Boot picture can be set as pictures or company name as you will.
It is highly reliable, highly accurate, low noise, and easy to use. Minimum data unit 0.001 mm. Maximum data size ± 99999.999mm. Maximum Speed: 9000mm/min (pulse is 0.001mm). Maximum pulse output frequency 150KHz.
Axis: 1, 2, 3 or 4 (X, Y, Z, C). X, Y, Z, C axis can conduct linear interpolation, X, Y can do circular interpolation. Electric Gear: numerator: 1-99999 denominator: 1-99999.
System main functions are automatic, manual, program editing, system parameters, self-check, settings, etc. Maximum 480 commands each program.
Stop and Start of Spindle motor. The conversational programming method automatically leads you to finish programming. Pause: Pause unless a certain condition is met, then skip to command called.
Output: Define on and off of output port, ex. Stop and start of the spindle motor.
Repeat: Go back to command called and repeat. Clockwise: Clockwise circular interpolation (Incremental programming). Counter-clockwise: Counter Clockwise interpolation (Incremental programming).
Delay: Define the time of delay. Judge: Judge if a certain condition is met and skip to command called. Skip: Whenever this command is executed, unconditionally skip commanding called. Machine Zero: Go back to machine zero. Speed: Axis moves at a certain speed and will stop when certain condition met.
Register: When this command is executed, the number on the main interface and the manual interface will be sent to this number. Count: When this command is executed, the number on the main interface and manual interface will increase by 1 or decrease by 1.
Coordinate: Set the current position as new coordinates. End: When the commands cannot be read, it will be considered as "End". Coordinating: This command is similar to Judge when the certain condition of coordinates is met, it will skip commanding called. PLC Judge: When a certain condition of PLC register value is met, it will skip commanding called. PLC Set: Set Register address and value.
1 x Set of CNC Controller. Our goal is your satisfaction.
If you like our products. Our goal is to provide first class customer service so we will try our best to resolve any problem.Monday to Saturday Beijing time 9:00 a. We will reply you within 24 hours. This item is in the category "Business, Office & Industrial\Industrial Automation & Motion Controls\Other Automation Equipment". The seller is "sweetl_1316" and is located in this country: CN. This item can be shipped worldwide.