3 Axis CNC 6040 USB 1500W Router Engraver Wood Drilling Milling Machine+Control

  

It is also not recommended to connect to a computers with 64 bit versions of Windows due to problems with the usb port driver. These issues are detailed and fully explained on the Software website.

PCB, wood, Plexi glass, PVC, Crystal Acrylic, RESIN, Plastic, SEALS, MDF, COMPOSITE, Aluminum material, Copper. This CNC 6040 machine is suitable for industry, Technology Research, Advertising Design. Arts Creation, Teaching, Student Project and Hobby Purposes.

It can work with various materials(metallic & non-metallic), such as: wood, pmma or other plastic, MDF board, native wood, PVC, Acrylic, wood, composite board plywood. Like aluminum, copper and silver to engrave them into 3D/2D works etc. It can used for engraving: advertising signs, PCB, nameplates, badges, seals, bronzing plate, aluminum alloy, acrylic plates, ABS resin doublecolor plate, PVC foaming board, indentation plates, signs, construction models, instrument panels, wooden products, etc.

The mini CNC router Frame is movable. The machine can connect with computer as other external device such as printer , scanner.. With the assist of the CNC ROUTER 6040T, your design idea will be real-time display.

X, Y, Z Working Area: 600(Y)390X120(Z)mm Outside dimension: 865680570mmLWH Table size: 770Y490Xmm. Lathe structure: 6061/6063 Aluminium alloy. X axis---High intensity Chromeplate shaft. Y axis---High intensity Chromeplate shaft. Z axis---High intensity Chromeplate shaft.

1Water cooled spindle motor can work longer time than air cooled motor. 2Water cooled spindle motor has higher stability and better concentricity than air cooled motor. The spindle motor must connect with the VFD. It cannot directly connect with the supply voltage (AC220V).

Please don't change the data setting of the VFD if you are not professional technicians, or it might damage the spindle motor. Material: 304 stainless steel, Copper coil, Pressure cast aluminum pipe water jacket.

VOLTS, current, power: AC220 /50Hz, 5A, 1.5KW VFD. Principal axis collet: ER11colletStandard configuration :6mm. Speed mode: By adjusting the VFD output voltage and operating frequency from 0-24000RPM.

Lubrication way: lubricated by high grease. Spindle precision: radial beat acuities 0.03mm. Software environment: Windows XP/Win7 32BITS. Working Speed :50-1500mm / min (different material with different speed settings). Control unit: Toroidal transformer + PWM power supply module + TB6560 stepping motor drive. The NEW 1.5KW water-cooled VFD is available operating for long time, which. Abilty of the machine and can be used to. Process aluminum alloy and hard wood. Water cooling spindle works more stable and durable.

High quality accurate ball Screws drive make the engrving more. Anti-blackflash, high precision, long life circle. Assembling and locating the CNC machine on steady desk well.

Make sure that your computer has a USB port output. Place the contral box in a ventilated dry place where there is no dust, no. Connecting the control box with the CNC machine and you computer and make.

Sure the plug will not come off. Correctly connect the machine with the controller. Cable which connect the Spindle motor with axis(X, Y, Z, A).

Damage the driver of the controller. Correctly instal the Spindle motor and the heat pump. Be covered completely in the water, then turned on the electric current to.

Check whether the water-cooling system working well. Installing a CNC control software and Drive. Fllowing our manual or guideline to set uo the software. Before turn on the machine, please check all the cable and water-cooling. System to make sure they are working fine.

You can enjoy making you dream with using our CNC machine now. Controller Description: Waterproof design, very durable, anti-dirt, oil spray Power by USB port Dimensions: 22 x 8 x 3cm The usb self-check light, you can type the " scroll" on the keyboard to activate it. Directional motion control: X+, X-, Y+, Y-, Z+, Z-, A+, A- Feed rate control: F+, F- Jog rate: J+, J- Spindle speed: speed up, slow down Programming: E-stop, cycle start, spindle on/off, Redo, single step, original point Package Include 1 Remote controller 1 Cable. Feedback is very important to us.

It is impossible to address issues if we do not know about them! Please keep the original box or packaging within 15days since item received. Your satisfaction is our ultimate goal.

We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount.

Due to time zones, our reply to your questions may not be immediately. If it's non-workdays, please kindly be patient and wait till Monday. The item "3 Axis CNC 6040 USB 1500W Router Engraver Wood Drilling Milling Machine+Control" is in sale since Monday, September 28, 2020. This item is in the category "Business, Office & Industrial\CNC, Metalworking & Manufacturing\Woodworking Supplies\Other Woodworking Supplies". The seller is "call_it_a_deal" and is located in Lausanne. This item can be shipped to United Kingdom.

• Transportation does not include: canarias
• Software enviroment: Windows xp/Windows 7 32 bites system
• Applicable software(2): if need full version,please buy it at official web
• Protection: Emergency stop button
• Command code: G code
• Computer connection: USB port
• Control unit: Toroidal transformer + PWM power supply module
• Operating Voltage: AC220V
• Software environment: windows XP / win7 32BITS
• Communication interface: through parallel connection with computer
• Carving Instructions: G code
• Cooling: Water-cooling
• Nut Model: ER11-A
• Principal axis collet: ER11colletStandard configuration :6mm
• Max working frequency: 60Hz
• Stepping motor: 57 two-phase 3A 150N.

  cm

• Lathe structure: 6061/6063 Aluminium alloy
• X,Y,Z Working Area: 600(Y)*390X*120(Z)mm
• Brand: Unbranded
• MPN: Does Not Apply
• PLUG: EU