3 Axis 6040 Cnc Router Engraver Milling Drilling Machine 1.5kw Vfd + Controller

  
32-bit version of Windows 2000, Windows XP, Windows Vista, or Windows 7 (64-bit versions will not work). Attention: This machine needs to connect to a computer through its controller. Box with a parrallel cable (both included). It is not recommended to connect. To a notebook through a parrallel port as the power saving features tend to.

It is also not recommended to connect to a computers. With 64 bit versions of Windows due to problems with the Parrallel port driver. These issues are detailed and fully explained on the Software website. This 6040T machine is suitable for industry, Technology Research, Advertising Design.

Arts Creation, Teaching, Student Project and Hobby. It can work with various materials(metallic & non-metallic), such as: wood. MDF board, native wood, PVC, Acrylic, wood, composite.

Copper and silver to engrave. Them into 3D/2D works etc. It can used for engraving: advertising signs, PCB, nameplates, badges.

Aluminum alloy, acrylic plates, ABS resin double. PVC foaming board, indentation plates, signs. Models, instrument panels, wooden products, etc.

The mini router Frame is movable. The machine can connect with computer.

Other external device such as printer, scanner.. With the assist of the ROUTER 6040T, your design idea will be real-time. PCB, wood, Plexiglass, PVC, Crystal Acrylic, RESIN, Plastic, SEALS, MDF, COMPOSITE, Aluminum material, Copper.

X, Y, Z Working Area 600(Y)390(X)120(Z)mm. Table size 770(Y)490(X)mm.

Lathe structure 6061/6063 Aluminium alloy. X axis 1605 Ball Screws. Y axis 1605 Ball Screws. Z axis 1204 Ball Screws.

X axis High intensity Chromeplate shaft. Y axis High intensity Chromeplate shaft. Z axis High intensity Chromeplate shaft. 1, Water cooled spindle motor can work longer time than air cooled motor. 2, Water cooled spindle motor has higher stability and better concentricity than air cooled motor. Tips:1, The spindle motor must connect with the VFD. 2, It cannot directly connect with the supply voltage (AC220V).

3, Please don't change the data setting of the VFD if you are not professional technicians, or it might damage the spindle motor. Material 304 stainless steel, Copper coil, Pressure cast aluminum pipe water jacket. VOLTS, current, power AC220 /50Hz, 5A, 1.5KW VFD. Principal axis collet : ER11collet, Standard configuration :6mm.

Speed mode By adjusting the VFD output voltage and operating frequency from 0-24000RPM. Lubrication way lubricated by high grease. Spindle precision radial beat acuities 0.03mm. Carving Instructions G code / TAB files / nc file / NCC files.

Communication interface through parallel connection with computer. Software environment:32-bit version of Windows 2000, Windows XP, Windows Vista, or Windows 7 (64-bit versions will not work). Non-integrated Video Card with 32MB RAM(Large G-code files, especially 3D files will require a video card with 512MB RAM or higher). Working Speed :50-1500mm / min (different material with different speed settings). Toroidal transformer + PWM power supply module + TB6560 stepping motor drive. 1, The NEW 1.5KW water-cooled VFD is available operating for long time, which. Abilty of the machine and can be used to.

Process aluminum alloy and hard wood. 2, water cooling spindle works more stable and durable. 3, High quality accurate ball Screws drive make the engrving more.

Anti-blackflash, high precision, long life circle. Assembling and locating the machine on steady desk well. Make sure that your computer has a 25pin parallel port output. Place the contral box in a ventilated dry place where there is no dust, no.

Connecting the control box with the machine and you computer. Sure the plug will not come off.

Correctly connect the machine with the controller. Cable which connect the Spindle motor with axis(X, Y, Z, A). The driver of the controller.

Correctly instal the Spindle motor and the heat pump. Be covered completely in the water, then turned on the electric current to. The water-cooling system working well.

Installing a control software and Drive. Fllowing our manual or guideline to set uo the software. Before turn on the machine, please check all the cable and water.

System to make sure they are working fine. You can enjoy making you dream with using our machine now. Highlights of water cooling system. It can cool the spindle and protect the machine. Avoid the spindle burn out.

Can engrave the high hardness or metal. It can improve the efficiency and accuracy of the machine. This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Woodworking Equipment\Routers".

The seller is "greatdeshop2019" and is located in this country: DE. This item can be shipped worldwide.

• shipping notice: Can not ship to Puerto Rico,Alaska/Hawaii
• Model: 6040
• Country/Region of Manufacture: China
• X,Y,Z Working Area: 600(Y)*390（X）*120(Z)mm
• Outside dimension: 865*680*570mm（L*W*H）
• Table size: 770（Y）*490（X）mm
• Lathe structure: 6061/6063 Aluminium alloy
• Max. Feeding height: ≤100mm
• Stepping motor: 57 two-phase 3A 150N.cm
• VOLTS，current，power: AC220 /50Hz，5A,1.5KW VFD
• Spindle speed: 24000 rpm
• Max working frequency: 60Hz
• Principal axis collet: ER11collet，Standard configuration :6mm
• Nut Model: ER11-A
• Cooling: Water-cooling
• Lubrication way: lubricated by high grease
• Repeat accuracy: 0.05mm
• Spindle precision: radial beat acuities 0.03mm
• Carving Instructions: G code / TAB files / nc file / NCC files
• Carving speed: 0-2500mm/min(different materials differ）
• Marke: Markenlos
• Brand: Markenlos
• Control: CNC
• Machine Type: Engraver Machine