XC709D 4-Axis CNC Numerical Control System for Carving Milling Drilling & Tapping. XC709D multi-function numerical control system is perfect for engraving, milling, drilling, and tapping. With 32-bit high-performance microprocessor, it features real-time multi-task control technology.It is designed with hardware interpolation technology, full linkage, and high-speed algorithm for small lines. Its interpolation accuracy is accurate as 0.001mm, and its speed up to 30 m/min. It is the best choice for your engraving machine, small processing center, CNC milling machine and CNC drilling machine. Based on 32-bit microprocessor, it supports full linkage, 0.001 mm interpolation accuracy, and direction + pulse and orthogonal pulse.
7-Inch Color LCD: 800 x 480 resolution. Equipped with 8 softkeys, it is easy to learn and operate. It offers rich display interfaces for parameter classification, alarm log, system diagnosis and the like. It facilitates debugging and maintenance.Using international standard G instruction which is compatible with FANUC system instruction. 40 kinds of G command codes support drilling and tapping cycles. Full screen editing of program for your parts. Built in 1G memory for storing N pieces of parts programs. USB Interface: Support reading and writing, data backup for U disk file.
I/O 24/24: It is flexible to use, for its I/O ports can be expanded to 96/96. Two Languages: Chinese and English operation interface for convenient operation. The system adopts acceleration and deceleration control before interpolation. Support length and cutter radius compensation.
Support processing via external pendant handwheel. Supports multi-level operation authorization for easy management, featuring time-limited system locking function. Supports for G code files of third-party software, including UG, Mastercam, PowerMill, Feature CAM, ArtCAM, JDPaint, Wentai.Flexible to use a variety of tool magazines, supporting self-programming tool magazine. Basic functions: - Number of Controlled Axes: 4-Axis - Number of Linkage Axes: Full Linkage - Tool Magazine: Support; Need to edit the code of tool magazine - Spindle: 2-way analog spindle, in which spindle 1 can be digital spindle (occupying a digital spindle) - Spindle Monitoring: Yes - Minimum Instruction Unit: 0.001 mm - Maximum Instruction Value: ±99999999 x mini- Fast Feed Speed: 30,000mm/min - Rate of Feed: F0, 25%, 50%, 75%, 100% - Pulse Modes: Mode 1: Direction + Pulse; Mode 2: Orthogonal Pulse (Recommended, featuring anti-jamming if your driver supports) - Maximum Frequency: Settable in 100Khz, 200Khz, 500KHz. (500KHz can only be achieved in orthogonal output modes of all axes) - Feed Rate Multiplier: 0-150% - Electronic Gear Ratio: 1-65535:1-65535 - Automatic Acceleration & Deceleration: Yes - Advanced Algorithm for Small Lines at High Speed: Yes - Compatible with Handwheel: Yes - Location: G00 (Linear Interpolation Location) - Interpolation: Linear (G01), Circular (G02/G03/G12), Spiral-line Interpolation - Returning to Reference Point: Automatically (G28) - LCD: 7-inch TFT LCD screen with resolution of 800 x 480 - MDI Softkey: 8 - Step Feed Amount: x1, x10, x100 - Communications Interface: U disk interface - External Handwheel Interface: Yes - I/O Interface: 24/24 (Extensible to 96/96) - Pause (seconds): Yes - Accurate Stop Status: Yes - Accurate Stop: Yes - Storage Travel Checking: Yes - MDI Running: Yes. It supports multi-segment operation - Reset: Yes - Jump Switch: Yes - Single Block Operation: Yes - Program Protection Switch: Yes - Self-diagnostic Function: Yes - Emergency Stop: Yes - Power Supply: Single-phase AC220V+10%-15%, 50Hz±1Hz - Coordinate Systems: Machine Coordinate System (G53), Workpiece Coordinate System (G92, G54-G59), Local Coordinate System (G52), Plane Designation of Coordinate System - Automatic Coordinate System Setting: Yes - Decimal Point Input: Yes Auxiliary Function: - Auxiliary functions: M2 digits, M code customization, manual/MDI/automatic control of spindle forward, reverse and stop; control of coolant to start and stop; control of lubrication to start and stop, etc.
Spindle Functions: - Spindle Function: Dual Spindles - Digital Spindle: Spindle 1 supports digital spindle, occupying a digital axis (Z axis does not support), featuring stable speed - Tapping: Support - Spindle Analog Output: Yes. Dual-spindle output Tool Functions: - Tool function: Support automatic tool change, support split-centered tool, three-point centered tool alignment - Tool Compensation Memory: - 9999.999 to 9999.999, 99psc - Tool Compensation: Tool Length Compensation & Cutter Radius Compensation Editing Operation: - Editorial Functions: Parameters, Diagnostic Bit Input, Program Editing, MDI Multi-segment Execution - Storage Capacity: 1G - Number of Stored Programs: 500pcs - Display of Program Names: Chinese, English, Numbers, and Combinations - Looking for Program Lines: Yes - Skip Optional Program Segment: Yes - Program Switch: Yes Display: - Displayed Language: Chinese, English - Processing Time & Number of Parts: Display - Spindle Speed, M/S Instruction: Yes. 1 x XC709D 4-Axis CNC Numerical Control System.Usually it cost about 35USD-50USD. If you receive defective item, please kindly notify us within 14 days. The item "XC709D 4Axis CNC Numerical Control System for Carving Milling Drilling&Tapping" is in sale since Thursday, May 20, 2021. This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Metalworking Equipment\Machining Centers & Milling Machines". The seller is "thefineshop" and is located in Shenzhen. This item can be shipped worldwide.